The requirements of many product applications such as improved separation sharpness and finer cut points, are no problem for the CFS/HD-S range of High-efficiency Fine Classifiers. Thanks to the maximum predispersion of the product to be classified, the targeted cut point and sharpness of cut can be optimized distinctly. Available for finenesses from 2.5 to 60 µm (d97).
This high efficiency air classifier was developed for ultra-fine, sharp separation, and is often used in conjunction with grinding plants.
The optimized classifier wheel geometry produces the finest cut points and high yields that have not been possible with production scale conventional air classifiers with only one classifier wheel.
The special dispersion zone directly in close proximity to the classifier wheel uses clean gas to efficiently disperse the material to be classified.
The machine can be cleaned thoroughly, in short time when product or batches are changed, due to its highly accessible internal arrangement.
Finenesses up to d97 2.5 µm (based on limestone)
High efficiency classifier with horizontal shaftWelded classifier housing with hinged door provides very good access for fast, easy cleaning and maintenance
Spiral housing for optimum coarse material orientation
Guide vane ring with adjustable vanes for efficient dispersion of the feed product prior to classification
Classifier wheel with exchangeable, simultaneously rotating immersion tube to achieve highest finenesses, unlimited adjustment
Gap between classifier wheel and fines outlet rinsed by gas for highest possible prevention of oversize material in the fine fraction
Classifier shaft seal rinsed by compressed gas to protect the bearings
Bearing of the classifier shaft is permanently grease sealed or oil lubricated for hot gas applications
Extremely sharp separation for improved fines extraction
Highest finenesses and maximum throughput achievable with just one classifier wheel
Even load of the classifier wheel through rotationally symmetrical design of the machine
Very good access for fast, easy cleaning and maintenance
Reproducible results
Optional designs available: pressure shock resistant, gas tight, wear protected
